Position data is required for full functionality of the chart display. Full details of heading, position and other data are given in Section 8. Before you install your system, plan the installation, considering:. Location of the display unit, as described in Section 8. Cable Runs, including cables for an integrated system to provide heading and position data etc.
All Raymarine equipment and accessories are designed to the best industry standards for use in the recreational marine environment. When you select the tide height option, a graph of predictions for maximum and minimum tide heights is displayed, data for sunrise and sunset is also provided as illustrated below.
Move the cursor to the required position — this can be anywhere on the chart and may be over an object — then press ENTER to display the object information pop-up. Page Working With Waypoints You can place waypoints, using simulator mode, before you install the chartplotter on your vessel. Page Selecting A Waypoint 2. The waypoint is placed at the current vessel position, or if not available, the cursor position.
It is added to the Waypoint List and named with the next available number. Selecting a Waypoint Positioning the cursor over a waypoint selects that waypoint and accesses the waypoint soft keys. Whilst the cursor is over the waypoint, the waypoint soft keys are displayed. Page Erasing A Waypoint 4. To edit the waypoint name, press the NAME soft key. Use the trackpad to enter or edit the name: Use the left or right side of the trackpad to move the cursor to the character you wish to change.
You can use the Waypoint soft keys and cursor to move the selected waypoint, or you can edit the waypoint position. Page Working With Routes 5. To make a route you place a series of waypoints on the chart. When a route is created it becomes the current route and is displayed on-screen. The current route is maintained when you power-off.
Move the cursor to the next waypoint position. A dotted line connects the cursor to the last placed waypoint. The waypoint is placed and the dotted line changes to a solid line. The route is saved and is listed as Route Not Named.
If you wish to name the route press the YES soft key. Use the trackpad to move the cursor right or left to the character you wish to edit. To clear the route, without saving it in the route database, press NO. To save the route in the database, press YES. The Name route soft keys are displayed and you should continue as described in the previous section, Saving the Current Route. A Route Leg data box such as the following is displayed. The current selections are highlighted.
The route list is displayed. The grey selection bar indicates the selected route. The waypoints in the current route are re- numbered to identify the new positions. Note: If you Clear the route before it is Saved, the new waypoint is removed. When you select the target destination, the chartplotter calculates bearing, distance and cross track error; this information is passed to a helmsman or autopilot. Page Follow A Route Follow a Route Note: The current route may have been created on this display, or created on another unit and received on this display via SeaTalk.
If a route has been reversed or if a route on screen was being followed but stopped before completion, the target waypoint — The arrival alarm is defined as a circle not visible on the screen , with a specified radius around the target.
To return to the default soft key display, move the cursor away from the waypoint. Use the trackpad to position the cursor as required. Page Transferring Waypoints And Routes 5. Page Chapter 5: Standard Chart Operations 3.
Page Using Tracks 5. You specify the interval at which track points are made, a line is drawn on-screen between each point. Press the appropriate soft key to set either a time interval or a distance interval; press the UP arrow to increase the interval, the DOWN arrow to decrease the interval. The track list pop-up and associated soft keys are displayed. The next available entry on the track list is highlighted. If required, you can use the trackpad to select another position in the list; this can be a blank slot, or an existing track that you no longer require.
Position the cursor on the starting point from which you wish to measure. The ruler end moves to the cursor which changes to a four-headed arrow. Page Alarms And Timers 6. Page Chapter 6: Further Chart Operations 2. Use the trackpad to move the selection bar up or down the list.
As each line is highlighted, the soft key labels are updated to show the current settings and controls, as shown in the example above. Page Man Overboard Mob 6. You can select the type of data used for the MOB position using the set up menus see Chapter 7. Page Cursor Echo accessed from System Set Up, described in Chapter 7 enables you to display a radar cursor on the chart picture, or a chart cursor on the radar picture you cannot display a remote chart cursor in a chart window nor a remote radar cursor in a radar window.
Page Gps Setup 6. Up to 48 log entries are held, when 48 entries have been made, the chartplotter will start overwriting the first entries. You start the log using soft keys provided in Data Log Mode.
To continue press the YES soft key, all log entries are deleted, but the data log remains active. Page Chapter 7: Setting Up The System Defaults You should check the functions of the parameters, and decide on the new settings, before making the changes.
Page The menu page is cleared so that you can see the effect of the slider adjustment on the radar picture. Page System Set Up Parameters 7. Each parameter is described in the following subsections. Page Data Boxes Data boxes provide regularly used data in a compact form so that most of the radar picture can still be seen. The ones you select here can be turned on and off as a group see Section 3. In the normal day presentation, black targets are displayed on a white background.
If you select NIGHT presentation, the picture is reversed, so that white targets are shown on a black background to reduce the intensity of the image. Page Units Auto Mode If you select Auto mode, the radar obtains the value of variation automatically, normally from received data. The variation value that is used depends on the data available, and is selected in the following order of priority: 1. This means that you could move the cursor over a target on the radar display, and check the identity of the target by looking at the radar cursor position on the chartplotter.
Page Language see Chapter 3. Note: On a radar master display, you cannot view a simulated image whilst the scanner is in transmit mode. If you switch the simulator on during transmit mode, the scanner is set to standby, and you cannot select transmit mode whilst the simulator is on.
Note: Some parameters can only be changed if you are using the Master display that is, the display to which the scanner is connected. Page Timed Transmission Option You can set up your own range scale. The Custom Range Setup Menu is displayed, which allows you to change the maximum range for each range selection.
Page Bearing Alignment To change the range scale, highlight the required range and use the soft keys to change the value. Start at the top of the list and work down, since each value must be greater than the value for the previous range in the list. Page Advanced Settings 1. Press the MENU key to display the set up soft keys. The Advanced Settings menu is then displayed.
However, this only controls a restricted range of tuning values. If the actual tuning peak falls outside this range, you will need to adjust the Tune Preset slider to move the controlled range over the tuning peak.
The chart is redrawn so that its centre matches that of the radar display. The radar is redrawn to the scale and heading mode of the chart. Waypoints and routes may therefore appear to be at different positions when you change the datum. When adding waypoints numerically to the waypoint list, or via SeaTalk, NMEA or HSB, it is important that they are referenced to the same datum that the chart is to be operated in.
Page Chapter 8: Installation If you are connecting your display to other equipment including another HSB series display unit it is strongly recommended that you install, test and align the master radar display as described in Sections 8. Page Planning The Installation For full functionality of the radar and chartplotter you need to provide position and heading data.
If speed data is also available the MOB function operates. Page VHF radios, cables and antennas. In the case of SSB radios, the distance should be increased to 2m 7ft. A radar beam can normally be assumed to spread 20 degrees above and below the radiating element. Trunnion knobs x2 Flush mount kit Power cable Page Chapter 5: Raymarine rl70c manual To Contact Raytheon us Especially for picking apart my run-on sentence and answering each part!
SeaTalk networking components may be found here. The Advanced Set Up menu is then displayed. Review Your Passage Plan Page The menu page is cleared so that you can see raymarine rl70c manual effect of the slider adjustment on the radar picture. Position the cursor on the starting point from which you wish to measure.
0コメント